Fouriertransform

Applied Nano Surfaces Sweden AB specializes in advancing manufacturing through its innovative low-friction coatings technology. Established in 2006 and headquartered in Uppsala, Sweden, the company develops a patented production technique that applies a nano-composite surface coating containing tungsten disulfide to steel and cast iron components. This technology significantly enhances the performance and durability of mechanical parts, such as engine components like cylinder liners and piston pins. By licensing its method to manufacturers, Applied Nano Surfaces enables the integration of its solutions into existing production processes, thereby facilitating easier adoption and implementation in various industrial applications.

Re:Newcell AB is a Swedish textile recycling company established in 2012 and headquartered in Stockholm. The company specializes in recycling cellulose-based textiles, such as cotton and viscose, through a patented process that transforms these materials into a dissolving pulp branded as Circulose. This innovative product serves as a raw material for producing biodegradable textile fibers like viscose and lyocell. By promoting the recycling of textiles, Re:Newcell aims to significantly lessen the environmental impact of the textile industry, reduce waste, and optimize resource use, thereby enhancing access to water and cultivable land for food production.

TechROi Fuel Systems AB specializes in the design, development, and manufacturing of fuel tank systems, primarily for the automotive market. Founded in 2012 and based in Bengtsfors, Sweden, the company provides a range of products, including passenger car fuel tanks and multilayer plastic tanks, alongside connecting components like fuel filler pipes. TechROi offers comprehensive services such as fuel systems validation, simulation testing, and climate chamber services, ensuring performance and safety through rigorous analysis techniques like fatigue and stress optimization and sag analysis. Additionally, the company collaborates strategically with steel suppliers to create innovative stainless steel fuel systems, which cater to smaller production volumes compared to conventional plastic solutions. This positioning allows TechROi to serve various sectors, including automotive and aerospace, by delivering tailored fuel system solutions.

OssDsign AB, founded in May 2011 by a team of researchers and engineers including Professor Håkan Engqvist and Dr. Thomas Engstrand, specializes in the development and global provision of advanced orthobiologics products. The company's flagship product, OssDsign Catalyst, is a bone graft designed to promote the formation of healthy bone tissue, particularly in spinal fusion surgeries. With a focus on international markets, OssDsign generates the majority of its revenue from the United States, while also operating in Germany, Sweden, the United Kingdom, and other regions worldwide. The company has cultivated a network of experts in clinical affairs, regulatory matters, and business development to support its growth and innovation.

TechROi first started in 1991 and is a technical company within services of engineering. Our employees work with technical consultation is committing and professional. We challenge ourselves every day, to be ahead both when it comes to well-intended market adjustments as well as new thinking. The customers’ demand on our ability to deliver high quality services pushes us to always develop. We are working market adjusting with expertise within technics, products, qualities, facilities and informative solutions for the entire product development chain. Our customers are active in different intensive development businesses within the industry. That has given us unique expertise on different types of businesses, that our customers also can benefit from. Through our work we develop the future together with our customers. Our intention is to keep growing in Sweden and Europe. Today we exist in Västra Götalands County and in Norway.

Lamera AB develops, manufactures, and markets lightweight metal sandwich materials. It offers Hybrix, a lattice beam structure in form of millions of microscopic steel fibers that bind the thin steel into a sandwich construction with a core that consists of air. The company serves manufacturers of aircrafts, military and civilian applications, and consumer products. Lamera AB was founded in 2005 and is based in Västra Frölunda, Sweden.

Inxide specializes in the development and production of structural thermoplastic composites designed for high-volume applications, primarily within the transportation sector, as well as in sports and consumer products. The company's innovative technologies leverage continuous fibers combined with a thermoplastic matrix, resulting in cost-effective and lightweight solutions tailored to meet the demands of these industries.

Pelly Group is a supplier and manufacturer of products and solutions for the kitchen and storage industry with a turnover of approximately 450 MSEK. The company operates under the brands Pelly, Mirro and LG Collection.

Osstell AB is a leading company in the field of dental implant stability measurement and osseointegration progress monitoring. Founded in 1999 and headquartered in Gothenburg, Sweden, Osstell specializes in developing innovative solutions such as Osstell IDx and Osstell ISQ, which utilize proprietary Resonance Frequency Analysis (RFA) technology to assess implant stability and monitor osseointegration non-invasively. The company also offers OsstellConnect, an online service that provides insights into implant treatment performance, and SmartPeg, a single-use item designed to protect implants during measurement. With over 700 scientific publications supporting its technology, Osstell serves dentists globally through a network of distributors and online sales. In 2018, the company became a subsidiary of W&H Dentalwerk Bürmoos GmbH, reinforcing its position in the dental industry.

SciBase Holding AB is a medical technology company based in Stockholm, Sweden, founded in 1998. The company specializes in the development and sale of devices for detecting skin cancer and other skin conditions. Its primary product, Nevisense, is a point-of-care device that utilizes Electrical Impedance Spectroscopy (EIS) to assess the electrical properties of human tissue, enabling the accurate detection of malignant melanoma. Nevisense is notable for being the only FDA-approved device for melanoma detection and the only MDR-approved technology for skin cancer detection in Europe. SciBase's offerings also include Nevisense Go and address additional areas such as non-melanoma skin cancer detection and skin barrier assessment. The company serves a range of customers, including public hospitals and private dermatology clinics, and has formed collaborative relationships with research institutions to enhance its technological and clinical development.

ÅAC Microtec primarily provides space solutions and systems for commercial, governmental, and educational customers in Sweden and the United States. The company develops, manufactures, and sells microelectronics systems and small spacecraft. It offers developments tools, including virtual system integration equipment and JTAG debuggers, as well as flat satellite, OBC lite, µRTU, and nanoRTU development kits. The company also provides 1U and 6U satellite systems and sub-systems; and rapid integration architecture products and space wire avionics, as well as power products, such as µPOL and POL artes.

Rototest develops, manufactures and markets test equipment, so called hub-mounted dynamometers, for the automotive industry. Since 1988 Rototest has redefined the rules for how vehicle drivelines can be tested. Rototest's patented solutions for hub-coupled vehicle dynamometers offers vastly better accuracy than traditional technology and meet the automotive industry’s increasingly complex needs. Rototest has been awarded the Frost & Sullivan "New Product Innovation Award" and the company's solutions are attributed the potential to become the new industry standard.

TitanX Holding specializes in providing engine cooling solutions for manufacturers of trucks, buses, off-highway equipment, and industrial diesel engines. The company manufactures a range of thermal management products, including engine, oil, bus, and genset cooling systems. With facilities located in Sweden, the United States, and Brazil, TitanX also offers design and testing services for its products, aimed at supporting clients in their pursuit of cleaner transportation solutions.

Smart Eye AB was founded in 1999 to provide the market with a real-time and completely non-invasive eye, eyelid and head tracking technology for a wide range of situations - a new generation of Eye Tracking technology based on 3D measurements was born. Different scenarios and applications mean different demands on the measurement system; from relatively unconstrained laboratory system set-ups that require fast and easy ways for reconfiguration, to compact solutions suitable for large-scale automotive installations. The Multi Camera System Smart Eye Pro is today the Gold Standard for Eye Tracking in the most complex applications such as automobiles, airplanes, trucks, trains, simulators, control rooms and many more.

CeDe Group AB, based in Malmö, Sweden, specializes in designing, developing, and manufacturing specialized application products and machinery. The company produces a diverse range of equipment, including rough-terrain forklifts, tunneling machines, ship excavators, and various construction machinery such as crawler and wheeled excavators. Additionally, CeDe Group offers custom adaptations for heavy vehicles and machinery, focusing on sectors like mining, construction, and offshore industries. With a strong emphasis on integrating development and production processes, the company fosters innovation by transforming product ideas into operational machines. Founded in 1923, CeDe Group has established itself as a key player in its field, serving a clientele that includes leading companies in its target industries.

ArcCore AB is a developer and provider of embedded platforms and development tools primarily for the automotive industry. Founded in 2009 and headquartered in Gothenburg, Sweden, the company offers products such as Arctic Core, an embedded platform for electronic control units (ECUs), Arctic Studio, a toolchain for software development, and Arctic Bootloader, which facilitates controlled software changes on ECUs. ArcCore emphasizes innovative solutions that enhance the efficiency and cost-effectiveness of embedded systems development. The company operates subsidiaries in multiple locations, including Linköping, Munich, Bengaluru, Palo Alto, and Shanghai. As of 2018, ArcCore operates as a subsidiary of Vector Informatik GmbH, strengthening its position in the market.

Jobro Sheet Metal Technology AB is a manufacturer and distributor of complex sheet metal components, primarily catering to the automotive industry. Founded in 1993 and based in Ulricehamn, Sweden, with an additional facility in Jönköping, the company produces a wide range of products including auto body components for passenger cars, truck side skirts, various truck silencers, thermal shields, and reinforcing beams. Jobro's offerings also extend to protective bonnets, truck clamps, and attachments for both trucks and passenger vehicles. The company serves diverse sectors, including automotive, subcontractors, energy, offshore, and marine manufacturing. As of December 2019, Jobro Sheet Metal Technology operates as a subsidiary of JCE Group AB, focusing on manufacturing prototypes and short production runs, which helps industry partners reduce lead times and costs.

Applied Nano Surfaces Sweden AB specializes in advancing manufacturing through its innovative low-friction coatings technology. Established in 2006 and headquartered in Uppsala, Sweden, the company develops a patented production technique that applies a nano-composite surface coating containing tungsten disulfide to steel and cast iron components. This technology significantly enhances the performance and durability of mechanical parts, such as engine components like cylinder liners and piston pins. By licensing its method to manufacturers, Applied Nano Surfaces enables the integration of its solutions into existing production processes, thereby facilitating easier adoption and implementation in various industrial applications.

MaxTruck is an innovative company that developed a unique multi-way multi-patent truck and high-tech solutions for more efficient and safer materials handling in industry.

Alelion Energy Systems is an energy storage and control company that offers high-performance batteries for optimized products. Alelion's main business is to define, develop, and deliver tailor-made batteries and power electronics to all kinds of demanding products that benefit from the new battery technology. Today, Alelion focuses on Lithium Ion cells that are viewed to be the best on the market with an exceptional number of cycles and safe behavior. Alelion and its partners take full responsibility for the whole battery subsystem so its customers can focus on their products and applications instead. Alelion Batteries was founded in 2006 and is a spin-out from ETC Batteries and Fuelcells, a R&D company for advanced energy solutions. The company is based in the Nödinge, north of Gothenburg, the heart of battery manufacturing and research in Sweden. We have 1600 m2 production area and our own development resources. The employees are highly educated and have long industrial experience in electronics, software, mechanical and test development. Many of the staff both in production and development have an automotive background and are used to work in efficient organizations. In 2007 private investors bought Alelion Batteries AB and the journey began. The company is currently owned by a set of smaller private companies, Sammaj AB, Pegroco Invest AB and Fouriertransform AB. The Company name was changed in may 2016 to Alelion Energy Systems AB.

Powercell Sweden AB develops and distributes fuel cell systems for the transport industry and selective high technology markets. It also develops a fuel processor, which converts existing fuel into clean hydrogen that is used to fuel the company's fuel cell system. The company's products are used in trucks and the marine segments. Powercell Sweden AB was founded in 2008 and is based in Gothenburg, Sweden.