Syensqo

DePoly is a chemical recycling company focused on addressing the challenges posed by plastic waste. Its innovative technology converts post-consumer PET plastic and polyester textiles into their primary raw materials at room temperature, eliminating the need for pre-washing, pre-sorting, or separating other plastics. This process enables the production of high-quality raw materials that can be reintegrated into the industry, facilitating the creation of new virgin-quality plastic products. By promoting this method, DePoly aims to contribute to a circular plastic economy, supporting sustainability and reducing environmental impact.

Tau Group is a technology company dedicated to advancing energy transition, decarbonization, and the electrification of transport. It develops patented technologies that balance sustainable, resource-efficient manufacturing with the performance requirements of electrification. This enables the creation of smaller, greener, and more powerful motors, transformers, and generators. Tau Group specializes in carbon-conscious protective coatings for both high-performance and standard copper, aluminum, and steel wires. With a team of over 50 professionals, the company is headquartered in Berlin, Germany, while its research and development hub is primarily located in Turin, Italy. Through its innovations, Tau Group aims to foster a more efficient world where processes operate at their full potential without unnecessary waste.

Invizius is a biotech company focused on enhancing extracorporeal treatments for patients, particularly in the areas of dialysis, cardiopulmonary bypass, and ECMO. The company has developed H-Guard, an advanced hemocompatible coating designed to mitigate foreign body reactions in the bloodstream. This innovative coating acts as an anti-inflammatory treatment that lines the inside of dialysis filters, allowing the process to occur without triggering the body's immune response. By suppressing unwanted innate immune reactions, Invizius aims to reduce the risk of cardiovascular disease among patients undergoing long-term dialysis. The company's efforts are positioned to revolutionize the way dialysis and other extracorporeal treatments are administered, improving patient outcomes and overall treatment efficacy.

iCOMAT is a developer of advanced automated composite manufacturing technology, primarily targeting the aerospace, automotive, and marine sectors. The company has introduced Rapid Tow Shearing (RTS), a groundbreaking process that allows for defect-free fiber steering in composite materials. This innovative approach enables the placement of carbon fiber tapes along curved paths, resulting in lighter, stronger, and more cost-effective products. By optimizing the mechanical properties of composites, iCOMAT's technology improves structural performance while significantly reducing the use of raw materials and overall production costs. As a spin-out from the University of Bristol, iCOMAT aims to revolutionize transport and manufacturing processes by providing solutions that enhance product performance and efficiency across multiple markets.

Jinyoung Bio operates in the cosmetics, manufacturing, and wholesale industries. The company is known for its eco-friendly approach to creating materials for the future. It specializes in the production of emulsifying stabilizers used in creams, skins, and lotions. Additionally, Jinyoung Bio produces dye dispersion adjuvants used in various cosmetic products such as mascara, lipstick, and creams. The company's commitment to sustainability and innovation is evident in its product offerings.

Bioeutectics focuses on creating environmentally friendly industrial products by providing high-performance, natural solvents. Utilizing proprietary eutectic technology, the company produces solvents that mimic the natural processes of plants, using 100% renewable resources. This innovation allows Bioeutectics to replace traditional petrochemical solvents in various industrial applications, promoting sustainability. Their product line caters to diverse sectors, including food, pharmaceuticals, and personal care, and is designed to be non-toxic, biodegradable, and customizable to meet specific industry needs. Through these advancements, Bioeutectics aims to lead the market in offering sustainable alternatives that enhance environmental responsibility in industrial processes.

Compact Membrane Systems specializes in providing scalable membrane solutions for the decarbonization revolution. It develops technology to capture and reduce greenhouse gas emissions, avert global warming, and transform the industry into a long-term sustainable enterprise.

Zeda, formerly known as PrinterPrezz and Vertex Manufacturing, is a technology solutions company based in Fremont, California. Established in 2017, Zeda specializes in advanced manufacturing technologies, particularly in the fields of additive manufacturing, nanotechnology, and precision manufacturing. The company develops and manufactures innovative medical devices, such as the GAIA™ Lumbar Interbody Fusion Device, and provides essential tools including 3D printing machines, manipulation software, and scanners. Zeda serves highly regulated industries, including medical, aerospace, space, and defense, with a mission to enhance lives through the integration of groundbreaking technologies and innovative ideas. Its commitment to fostering collaboration and incubating new concepts positions Zeda as a leader in its sector.

Zeda, formerly known as PrinterPrezz and Vertex Manufacturing, is a technology solutions company based in Fremont, California. Established in 2017, Zeda specializes in advanced manufacturing technologies, particularly in the fields of additive manufacturing, nanotechnology, and precision manufacturing. The company develops and manufactures innovative medical devices, such as the GAIA™ Lumbar Interbody Fusion Device, and provides essential tools including 3D printing machines, manipulation software, and scanners. Zeda serves highly regulated industries, including medical, aerospace, space, and defense, with a mission to enhance lives through the integration of groundbreaking technologies and innovative ideas. Its commitment to fostering collaboration and incubating new concepts positions Zeda as a leader in its sector.

Tau Group is a technology company dedicated to advancing energy transition, decarbonization, and the electrification of transport. It develops patented technologies that balance sustainable, resource-efficient manufacturing with the performance requirements of electrification. This enables the creation of smaller, greener, and more powerful motors, transformers, and generators. Tau Group specializes in carbon-conscious protective coatings for both high-performance and standard copper, aluminum, and steel wires. With a team of over 50 professionals, the company is headquartered in Berlin, Germany, while its research and development hub is primarily located in Turin, Italy. Through its innovations, Tau Group aims to foster a more efficient world where processes operate at their full potential without unnecessary waste.

Autonomic Materials, Inc. specializes in the design, manufacture, and marketing of self-healing solutions for the coatings industry. The company produces microencapsulated additives that include both dual and single capsule systems, which utilize various chemical processes to repair coating damage at the micron level. These products provide corrosion protection and are applicable to a wide range of substrates, including metals, wood, concrete, plastics, and composites. Autonomic Materials' solutions are utilized in diverse sectors such as alternative energy, industrial maintenance, military equipment, infrastructure, and consumer paints. Founded in 2005 and based in Champaign, Illinois, the company focuses on enhancing the performance and longevity of materials by enabling them to respond to damage autonomously, thus reducing the need for manual detection and intervention.

9T Labs AG, founded in 2018 and based in Zürich, Switzerland, specializes in manufacturing 3D printers that produce carbon composite parts. The company integrates advanced software, additive manufacturing, and industry-standard materials to offer a digital composite production solution. Utilizing its proprietary Additive Fusion Technology (AFT), 9T Labs enables manufacturers to create lightweight structural components with precise 3D fiber orientation, facilitating mass production at reduced costs. The intuitive design software supports optimal fiber placement, while automated production equipment enhances efficiency across the entire value chain. The technology allows for the efficient production of high-performance parts, including applications in drones and prosthetics, making it accessible for engineers and manufacturers alike.

Phase Two Chemicals is a clean chemistry company focused on developing innovative technology for the on-site production of hydrogen peroxide. By utilizing an electrochemical catalyst research platform, the company aims to simplify the hydrogen peroxide production and delivery process. This technology enables clients, particularly in the pulp and paper mill industry, to produce cost-efficient electric chemicals. Through its advancements, Phase Two Chemicals seeks to enhance the efficiency and sustainability of hydrogen peroxide production.

DMC Biotechnologies, Inc. is a biotechnology company based in Boulder, Colorado, that specializes in developing bio-based products through microbial fermentation technology. Founded in 2014, the company focuses on producing specialty chemicals, flavors, fragrances, nutraceuticals, natural products, and pharmaceuticals. Utilizing its Dynamic Metabolic Control technology, DMC Biotechnologies aims to enhance the efficiency and sustainability of production processes, reducing both energy consumption and resource use. This innovative approach allows for quicker development timelines and lower costs, supporting a transition towards a more sustainable economy.

Invizius is a biotech company focused on enhancing extracorporeal treatments for patients, particularly in the areas of dialysis, cardiopulmonary bypass, and ECMO. The company has developed H-Guard, an advanced hemocompatible coating designed to mitigate foreign body reactions in the bloodstream. This innovative coating acts as an anti-inflammatory treatment that lines the inside of dialysis filters, allowing the process to occur without triggering the body's immune response. By suppressing unwanted innate immune reactions, Invizius aims to reduce the risk of cardiovascular disease among patients undergoing long-term dialysis. The company's efforts are positioned to revolutionize the way dialysis and other extracorporeal treatments are administered, improving patient outcomes and overall treatment efficacy.

Zeda, formerly known as PrinterPrezz and Vertex Manufacturing, is a technology solutions company based in Fremont, California. Established in 2017, Zeda specializes in advanced manufacturing technologies, particularly in the fields of additive manufacturing, nanotechnology, and precision manufacturing. The company develops and manufactures innovative medical devices, such as the GAIA™ Lumbar Interbody Fusion Device, and provides essential tools including 3D printing machines, manipulation software, and scanners. Zeda serves highly regulated industries, including medical, aerospace, space, and defense, with a mission to enhance lives through the integration of groundbreaking technologies and innovative ideas. Its commitment to fostering collaboration and incubating new concepts positions Zeda as a leader in its sector.

Solid Power Inc. specializes in the development of solid-state rechargeable batteries that are free from volatile or flammable liquid components. Founded in 2011 and based in Louisville, Colorado, the company focuses on creating batteries for various applications, including electric vehicles, portable electronics, aircraft, and satellites. Its solid-state batteries are designed to be energy-dense, safe, and reliable, offering significant improvements in performance, safety, and cost-effectiveness. Solid Power aims to license its battery cell designs and manufacturing expertise to leading battery manufacturers and automotive original equipment manufacturers, while also selling its proprietary sulfide-based solid electrolyte for use in all-solid-state battery cells.

Kumovis is a medical technology company focused on advancing the field of 3D printing for industrial and medical applications. It has developed a specialized 3D printing system that integrates clean room technology, allowing for the precise processing of high-performance polymers. This innovation enables the creation of patient-customized implants, facilitating more convenient and effective medical operations in hospitals. Through its cutting-edge technology, Kumovis aims to enhance the capabilities of medical professionals and improve patient outcomes.

Plyable is an innovative company that has developed a unique software solution utilizing advanced AI and machine learning to automate the design and manufacture of composite tooling. The platform addresses complex challenges such as feature recognition and moldability analyses, streamlining the tooling process for various industries. With features like secure upload capabilities and comprehensive CMM reports, Plyable enhances supply chain resilience and helps clients optimize material selection for their projects. This approach significantly reduces project timelines and improves efficiency in the manufacturing process.

NobleAI is a developer of a science-based artificial intelligence platform focused on enhancing the development of chemical and material products. By leveraging its advanced AI technology, NobleAI enables companies to streamline their materials development strategies, providing actionable insights and reliable predictions. This innovation helps reduce costs and accelerates the creation of new chemicals, materials, and formulations. As a result, businesses can innovate more rapidly and bring higher-performing, environmentally sustainable products to market more efficiently.

Autonomic Materials, Inc. specializes in the design, manufacture, and marketing of self-healing solutions for the coatings industry. The company produces microencapsulated additives that include both dual and single capsule systems, which utilize various chemical processes to repair coating damage at the micron level. These products provide corrosion protection and are applicable to a wide range of substrates, including metals, wood, concrete, plastics, and composites. Autonomic Materials' solutions are utilized in diverse sectors such as alternative energy, industrial maintenance, military equipment, infrastructure, and consumer paints. Founded in 2005 and based in Champaign, Illinois, the company focuses on enhancing the performance and longevity of materials by enabling them to respond to damage autonomously, thus reducing the need for manual detection and intervention.

MultiMechanics, Inc. develops software solutions for modeling and analyzing material microstructures, utilizing TRUE Multiscal technology to assess material behavior. The company offers coupled thermo-chemo-mechanical tools designed for applications such as layered 3D printing and viscoelastic cement concrete. Its flagship software, MultiMech, is compatible with major engineering platforms like Abaqus and Ansys, allowing engineers to generate microstructures, explore damage mechanisms, and conduct implicit mechanical analyses. This virtual testing software aids companies in reducing the need for physical prototyping and testing, enabling them to innovate in complex materials while accurately predicting structural failures based on microstructural design variables. MultiMechanics serves various industries, including aerospace, automotive, and consumer products, helping clients save significantly on product development costs. Founded in 2010 and based in Omaha, Nebraska, the company is a subsidiary of Siemens Aktiengesellschaft.

NOHMs Technologies, Inc. specializes in the development of advanced lithium-sulfur and lithium-ion battery technologies, targeting a variety of vehicle markets, including spacecraft and electric automobiles. Founded in 2010 and headquartered in Rochester, New York, the company creates innovative materials and manufacturing processes, particularly focusing on enhancing battery performance and safety through its NanoLyte Electrolyte solutions. These new functional ionic liquid materials offer significant improvements in energy capacity and runtime while reducing costs. NOHMs Technologies provides a range of products including electrodes, electrolytes, and separators, as well as solutions for secondary manufacturers, operating under a sales and licensing business model.